Products and Services
Explore Chase Nedrow’s full range of engineered refractory products and services. Select your industry to view application-specific solutions designed for high-performance thermal systems and demanding operating environments.
Select Your Industry
Power
Refractory systems for utility, industrial, and cogeneration power plants—engineered for thermal cycling, slag resistance, and fuel flexibility.
Fabrication
- Custom burner tiles, access ports, and expansion joints fabricated for boilers, HRSGs, and gas turbine systems.
Material Sales
- High-performance refractories are selected for their thermal endurance, chemical resistance, and reliability in steam systems.
Emisshield
- High-emissivity coatings that boost radiant transfer and temperature uniformity across boiler walls and radiant sections.
Precast
- Pre-fired shapes for burner assemblies, wall linings, and floor systems—engineered for rapid installation and cycling resistance.
Thermography
- Infrared imaging detects insulation loss and refractory failure, supporting predictive maintenance and improved fuel efficiency.
Heat Treat
Refractory systems for batch and continuous heat-treating furnaces—built to handle thermal cycling, rapid ramp-up, and precise temperature control.
Material Sales
- High-temperature materials are selected for thermal shock resistance, chemical stability, and consistent heating profiles.
Fabrication
- Custom refractory assemblies for furnace floors, burner surrounds, and access ports—engineered for performance and uptime.
Emisshield
- High-emissivity coatings enhance temperature uniformity, improve radiant heat flow, and reduce cycle times.
Precast
- Pre-fired refractory shapes for burner blocks, roof tiles, and door linings—optimized for high-cycle operations.
Thermography
- Infrared inspections to identify refractory wear, heat loss, and insulation failure across heat treat systems.
Cement & Lime
Refractory systems engineered for rotary kilns, preheaters, and coolers—designed to withstand alkali attack, abrasion, and extreme thermal cycling.
Material Sales
- Abrasion- and alkali-resistant refractories built for rotary kilns, coolers, and high-temperature ductwork.
Fabrication
- Custom linings for burner pipes, dam rings, and preheater zones—fabricated for dimensional accuracy and fast installation.
Emisshield
- High-emissivity coatings enhance thermal efficiency, reduce fuel consumption, and stabilize temperature in rotary kilns and towers.
Precast
- Pre-fired shapes for cooler grates, burner tiles, and transition zones—engineered for high-wear, high-cycle durability.
Thermography
- Infrared diagnostics for detecting refractory failure, insulation loss, and thermal bridging in kilns and preheaters.
Aluminum
Refractory systems for melting, holding, and casting furnaces—designed to resist metal infiltration, thermal shock, and chemical attack.
Material Sales
- Non-wetting refractories and insulation are built to withstand molten aluminum, dross buildup, and corrosion.
Fabrication
- Custom spouts, burner surrounds, and access ports fabricated for aluminum furnace configurations.
Emisshield
- High-emissivity coatings improve heat transfer and reduce dross formation in melting and holding furnaces.
Precast
- Pre-fired shapes for launder blocks, hearths, and furnace linings—built for dimensional precision and thermal cycling.
Thermography
- Thermal imaging detects hot spots, metal penetration, and insulation breakdown in aluminum systems.
Iron & Steel
Refractory systems for blast furnaces, ladles, and reheat furnaces—engineered for thermal shock, abrasion, and slag resistance in high-temperature metallurgy.
Material Sales
- Dense and insulating refractories were selected for their resistance to slag, high-temperature cycling, and metallurgical process stability.
Emisshield
- High-emissivity coatings enhance heating uniformity, reduce fuel consumption, and improve heat flux in steel furnaces.
Fabrication
- Custom burner ports, slide-gate inserts, and hearth blocks fabricated for steelmaking applications.
Precast
- Pre-fired refractory shapes for ladle linings, furnace roofs, and tap hole blocks—built for thermal endurance and repeatability.
Thermography
- Infrared inspections to detect refractory wear, slag penetration, and insulation loss across critical furnace zones.
Boilers
Refractory systems for industrial and utility boilers, HRSGs, and waste heat recovery—engineered for thermal cycling, slag resistance, and steam system integrity.
Material Sales
- Castables, plastics, and brick designed for boiler walls, burner zones, and flue systems—resistant to soot, slag, and pressure cycling.
Fabrication
- Custom burner tiles, inspection ports, and refractory door assemblies are fabricated for fast installation and long-term durability.
Emisshield
- High-emissivity coatings enhance radiant heat transfer and reduce fuel usage in boiler fireboxes and radiant sections.
Precast
- Pre-fired shapes for burner blocks, wall linings, and arch components—designed for dimensional stability and thermal endurance.
Thermography
- Infrared scanning detects insulation failure, lining wear, and thermal leakage in boilers, ducts, and expansion zones.
Petrochemical
Refractory systems for reformers, thermal oxidizers, process heaters, and sulfur recovery units—are built to withstand extreme heat, chemical attack, and pressure cycling.
Material Sales
- Refractories selected for sulfur resistance, carbon buildup prevention, and thermal endurance in petrochemical furnaces.
Fabrication
- Custom burner surrounds, cone blocks, and transition modules designed for high-temperature, chemically aggressive environments.
Emisshield
- High-emissivity coatings improve radiant heat transfer and temperature stability in reformers and process heaters.
Precast
- Pre-fired components for burner zones, risers, and SRU transitions—engineered for consistent fit and thermal shock resistance.
Thermography
- Thermal imaging detects lining loss, gas leaks, and insulation degradation in reformers, ducts, and oxidizer chambers.
Crematories
Refractory systems for cremation chambers, afterburners, and stacks—designed for rapid thermal cycling, oxidation resistance, and emissions stability.
Material Sales
- Refractories selected for thermal shock resistance, clean burnout, and durability in high-cycle cremation systems.
Fabrication
- Custom burner blocks, floor tiles, and door linings fabricated for cremation chambers and afterburner assemblies.
Emisshield
- High-emissivity coatings enhance heating efficiency, reduce cycle time, and extend the service life of refractories.
Precast
- Pre-fired shapes for burner surrounds, access ports, and structural tiles—engineered for fast installation and long-term endurance.
Thermography
- Infrared inspections identify lining degradation, heat loss, and weak points in cremation and emissions zones.
Ethanol
Refractory solutions for boilers, rotary dryers, burner systems, and thermal oxidizers—engineered to withstand alkali-laden fuel, abrasive ash, and high thermal cycling.
Material Sales
- High-performance refractories engineered for thermal shock, abrasion, and alkali resistance in ethanol dryers and boilers.
Emisshield
- High-emissivity coatings that enhance radiant efficiency in boilers and dryers—reducing fuel demand and improving temperature uniformity.
Fabrication
- Custom burner tiles, door assemblies, and flue components are designed for high-velocity, high-dust environments.
Boiler Doors
- Engineered refractory doors and liners built for repeated cycling, high-pressure sealing, and soot resistance.
Precast
- Pre-fired shapes for burner surrounds, door frames, and hearths—delivering fast installation and consistent performance.
Burner Tile
- Durable, preformed burner tiles designed for optimal flame shaping, combustion efficiency, and repeatable performance.
Boiler Plugs
- Thermal shock-resistant plugs and port covers that maintain seal integrity while allowing for safe inspection access.
Thermography
- Thermal imaging for dryers, boilers, and ducts—detects insulation loss, heat leaks, and wear before failure.
Biomass
Refractory systems for biomass boilers, gasifiers, and combustion units—built to resist alkali attack, slag buildup, and rapid thermal cycling.
Material Sales
- High-duty refractories and insulation rated for alkali-laden biomass combustion and slag resistance.
Fabrication
- Custom burner blocks, expansion joints, and door linings are built for thermal cycling and mechanical abuse.
Emisshield
- High-emissivity coatings that enhance combustion efficiency and extend the life of refractory materials in biomass systems.
Precast
- Pre-fired shapes for high-wear areas—engineered to withstand slag attack and thermal shock.
Thermography
- Infrared scanning detects lining failure, heat loss, and wear—supporting predictive maintenance planning.
Glass
Refractory systems for float, container, and specialty glass furnaces—designed for extreme heat, corrosive vapors, and thermal uniformity across melt and delivery zones.
Material Sales
- High-purity, corrosion-resistant refractories engineered for glass contact, furnace crowns, and regenerator chambers.
Fabrication
- Custom port blocks, burner surrounds, and checker supports are fabricated for dimensional precision and long-term reliability.
Emisshield
- High-emissivity coatings that improve heat distribution and extend refractory life in crowns, breast walls, and regenerators.
Precast
- Pre-fired shapes for structural linings, burner blocks, and access modules—engineered for molten contact and thermal cycling.
Thermography
- High-purity, corrosion-resistant refractories engineered for glass contact, furnace crowns, and regenerator chambers.
Kilns
Refractory systems for rotary, shuttle, tunnel, and specialty kilns—engineered to withstand thermal cycling, mechanical wear, and aggressive atmospheres.
Material Sales
- High-temperature brick, castables, and insulation are selected for durability under repeated firing and cooling cycles.
Fabrication
- Custom burner ports, door linings, and arch blocks are built for tight fit, thermal control, and ease of maintenance.
Emisshield
- High-emissivity coatings accelerate heat-up, reduce fuel usage, and improve temperature consistency across kiln zones.
Precast
- Pre-fired components for kiln doors, roofs, and burner surrounds—engineered for fast installation and thermal endurance.
Thermography
- Infrared scanning identifies insulation gaps, lining loss, and temperature deviations in kiln walls, roofs, and ports.
Incineration
Refractory systems for waste-to-energy, medical, and hazardous waste incinerators—built to withstand slag buildup, corrosive off-gases, and high thermal cycling.
Material Sales
- Refractories engineered for thermal shock, alkali resistance, and abrasion in primary and secondary combustion zones.
Fabrication
- Custom burner blocks, throat linings, and port assemblies are fabricated for reliable sealing and heat containment.
Emisshield
- High-emissivity coatings enhance heat transfer, minimize cold zones, and prolong the lifespan of refractory linings in incinerators.
Precast
- Pre-fired shapes for burner tiles, access panels, and stack transitions—designed for rapid installation and repeatable performance.
Thermography
- Thermal imaging detects lining wear, energy loss, and insulation failure in combustion chambers and stack systems.
Thermal Processing
Refractory systems for sintering, annealing, drying, and high-temperature processing—designed for rapid cycling, thermal uniformity, and atmosphere control.
Material Sales
- Refractories and insulation are selected for consistent temperature control in oxidizing, reducing, and inert atmospheres.
Fabrication
- Custom burner blocks, port linings, and transition modules fabricated for precision fit and quick installation.
Emisshield
- High-emissivity coatings that enhance heat transfer and thermal consistency in high-performance thermal systems.
Precast
- Pre-fired refractory shapes for chamber linings, doors, and heat-treatment zones—engineered for dimensional repeatability.
Thermography
- Infrared diagnostics to identify refractory wear, heat loss, and thermal imbalance in process furnaces and dryers.
Air Tool Sales & Repair
Partnered with APT and Chicago Pneumatic, we can offer the highest quality of air tools ranging from rivet busters to parts and repair what you need to get back to work. Inquire at info@chasenedrow.com
